Magni 502







Magni 502
EBS Magni 502 Bass Combo
The EBS Magni 502 is a super lightweight bass combo with innovative design that delivers surprisingly big sound from a compact rig. Available in 2×10″ and 1×15″ models, it’s perfect for gigs and rehearsals without compromising tone or power.
Weighing just 15.4–16.5 kg thanks to neodymium speakers, it punches far above its weight. Front and rear porting creates a rich, room-filling sound, while the analog preamp and 500 W power amp offer flexible tone-shaping and expansion options. The Magni 502 also includes a balanced XLR out for seamless live or studio use.
Features
Weight
15.4 kg (210-model), 16.5 kg (115-model)
Amp Design
Based on award-winning Reidmar amp design
Power Output
500W
Clip Technology
EBS Soft Clip preserves solid bottom at high volume
EQ
4-band EQ with Bright and Notch filters
Compressor
Built-in Compressor/Limiter
Speakers
High-efficiency Neodymium speakers
Cabinet Design
Double-ported cabinet (front and back)
Power-to-Weight Ratio
Superior
Configurations
2×10″ or 1×15″ speaker, both with tweeter
Extension Cabinet
Speakon output for 4 to 8 ohm cab
Voltage
Switchable 120/230V
Balanced Output
XLR with ground lift
Headphones
Dedicated output
Line Out
Yes
Effects Loop
Yes
Accessories
Comes with dust cover
Specs
Input Impedance
1 MΩ // 100 pF
Character Filter
Low: +7 dB @ 40 Hz, Mid: -2 dB @ 800 Hz, High: +3 dB @ 10 kHz
Compressor / Limiter
Gain 0 dB, Max Attenuation 24 dB, Compression Ratio max 3:1, Attack (80%) <10 ms, Release (80%) ~100 ms
Filters
Bass: 12 dB/oct shelving ±18 dB @ 60 Hz
Mid: Bandpass 100–6000 Hz ±12–15 dB gain
Treble: Shelving ±18 dB @ 6 kHz
Bright: Shelving +15/-0 dB @ 10 kHz
Balanced XLR Output
Nominal level -10 dBv, Frequency response 10–20,000 Hz (+0/-3 dB), Connections 1-GND, 2-Hot, 3-Cold, Options Ground Lift, Pre/Post EQ
Effect Loop
Signal level nominal -10 dBv, Gain unity (1:1), Output impedance 100 Ω, Input impedance >50 kΩ // 100 pF
Line Out
Output impedance 100 Ω, Signal level nominal 0 dBv
Phones Out
Recommended impedance 32–200 Ω
Power Amp
500 W output, Minimum external cabinet load 4 Ω, Speakon output jack
Auxiliary Output
Max 500 W power, Mains protection T2.5A fuse (230 V), T5A fuse (100/120 V)
Cabinet Details
Magni 502 – 210
2 × 10″ Neodymium speakers + tweeter, Frequency response 45 Hz – 20 kHz, Size 56 × 44 × 36.5 cm (22 × 17.3 × 14.4 in), Weight 15.4 kg (33.95 lbs), Dust cover included
Magni 502 – 115
1 × 15″ Neodymium speaker + tweeter, Frequency response 30 Hz – 20 kHz, Size 56 × 44 × 36.5 cm (22 × 17.3 × 14.4 in), Weight 16.5 kg (36.37 lbs), Dust cover included
Product variants
Showcase
Magni 502 Artists
